I am selling my BMC TimeMachine TMR01 in frame size 54. The bike has always been well maintained and serviced regularly. All service receipts, as well as the original purchase receipt, are available and can be provided if needed. The bike has always been stored in a well-air-conditioned and dry basement. Both technically and visually, the bike is in very good condition (see pictures). I have never crashed it. The following components have been replaced since purchase: stem (from 110mm to 90mm), handlebars (with 38cm width and 18-degree flare), derailleur (with a long cage to accommodate 11-34 cassettes), saddle (which fit me better). The frame, bottom bracket, wheelset, and crank have a mileage of about 10,000-12,000 km. This is also the reason why I am selling the bike. I own a gravel bike in addition to this one and have therefore used this bike very little. The mileage of other wear parts: Cassette approx. 500 km Chain (waxed) approx. 500 km Tires (Continental Grand Prix 4-Season 23mm) & tubes approx. 500 km Handlebar tape approx. 500 km Regarding the installed components, the bike is equipped with a complete Shimano Ultegra group. The crank has a length of 172.5mm and 53-39 chainrings. The cassette has been upgraded to 11-34. The original DT Swiss R46C hybrid wheelset is mounted. The handlebars are from Ritchey (Comp Butano, 38cm wide, 18-degree drop flare) and the stem is from Deda (Superzero 90mm). The pedals are from Shimano (Shimano DURA-ACE PD-R9100 SPD-L clipless pedals). The saddle is a Brooks Swift (which is certainly a special choice for this bike, but saddles are known to be very individual). The saddle is new and has not been broken in yet. The original packaging is available. During the last service in spring 2023, the following work was carried out: - [ ] The right shift cable was replaced - [ ] Both wheels were trued - [ ] The tires were replaced - [ ] The headset was cleaned, greased, and adjusted - [ ] The chain was replaced - [ ] The cassette was replaced - [ ] The freehub body was replaced - [ ] The derailleur was swapped - [ ] The handlebar tape was replaced Since then, I have only ridden the bike about 500 km. Therefore, no further service has been done since then. Before the sale (in this spring 2026), I carried out the following work myself: - [ ] Checked the headset - [ ] Checked all screws with a torque wrench - [ ] Greased the axle and bearings - [ ] Re-waxed the chain - [ ] Thorough cleaning As a bonus, I am including a pair of Shimano SPD-SL shoes (Shimano SH-RC3) in size 45 for free. The bike can be viewed and test-ridden at any time. I am available for any questions at any time.