Stable, elegantly designed side stand that withstands the test of time The Pletscher side stand is a classic in bicycle construction, but it requires the so-called "Pletscher plate" behind the bottom bracket, to which the rear fender can also be attached. The genius of this soldered mounting point is that the stand does not get in the way while pedaling and the frame's paint is not damaged when screwing it on. It is advisable to secure the sturdy stand screw with Loctite or linseed oil so that it doesn’t loosen due to the vibrations from folding and unfolding. To ensure the bike achieves the correct angle with the stand extended, the stand must first be cut down with a hacksaw. To do this, measure the distance from the ground to the Pletscher plate. There is a scale on the stand. You saw at the measured value. Simple, but you need to know this, as no operating instructions come with the stand.

Originally posted on Galaxus

Product is good, the description is not I give two stars because the product is actually good, but the description specify that the rubber boot will be gifted to you. Well they sent me a second one with the same issue. Please change the description.

Originally posted on Galaxus